Since
June 2018, our Elvira is delivered with a new design.
Top painted with graphic in 2 colours,
bottom in visible carbon with white bars |
|
Fuselage
with ready installed electronic parts
|
|
Prefabricated
hollow
for easy
mounting of connecting plug between wing and fuselage. The
plug is enclosed in the kit.
|
|
Prefabricated
threads for easy mounting of the tail onto the fuselage.
Again, a plug can be let into the parts for easy automatic
electronic connection.
|
|
Prefabricated
screw holes on the middle part.
On the downside you can see the hollow for the plug. |
|
Upper
side with paint in 2 colours,
underside in visible carbon with white stripes |
|
Prefabricated
hollow for precise and simple mounting of the levers
in the outer wings |
|
Aerodynamically
designed control
covers |
|
The
servo boxes were optimized for all standard servos. |
|
Stiff
shell of the wing without CFR-sandwich-construction
Often
transport and landings in rough terrain don't create permanent
dents on the wing as this is the case with sandwich-constructions.
All that remains are possibly some scratches.
|
|
For
electrical connection a plug can be let into the root
rib (here middle part).
Twist pins are already installed.
|
|
Ready
installed plug in the outer wing |
|
Rudder
gaps are closed on wing and V-tail.
All
rudders are mounted with kevlar.
|
|
Covers
for servos
are enclosed in the kit. |
|
Easy
system for ballast by varying the connectors.
The package includes 4x carbon rods and 4x short steel bars.
Due to the extra weight in the wing the
model flies calmly even in strong wind.
The ballast is placed in the wing to relieve the spar from additional
load. This is advantageous especially for flying with high g-loads.
|
|
The
wing is also prepaired for long steel bars (double size)
as connectors.
These can be ordered on request. |
|
Holes
and threads for mounting the v-tail on the fuselage are
pre-fabricated.
|
|
Servos
are installed in the V-tail. The V-tail can easily be disassembled
due to the plug built-in. |
|
Protection
bags made
of
welded bubble wrap coated
with aluminium foil
(not included in kit) |
|
Protection
bags made
of stitched foam material coated with aluminium foil
with fabric edging, practical velcro
fasteners and
strengthenings at the wing tips
(not included in kit) |
|
Kitparts are enclosed in kit.
|
|